Wastewater Sensors
SensorsONE Wastewater Sensors SensorsONE Wastewater Sensors Wastewater submersible sensors for installing in sewage treatment systems, landfill sites and other industrial waste management sites. Download PDF LMK382 Specifications Low Range IP68 Waste Water Level Transmitter LMK387 Specifications Cleanable Sewage and Sludge Pressure/Level Sensor LMK809 Specifications Plastic Submersible Low Level Transmitter LMK807 Specifications Plastic Submersible Level Transmitter. […]
Chemical Resistant Sensors
SensorsONE Chemical Resistant Sensors SensorsONE chemical-resistant submersible sensors for use with caustic chemicals such as acid & alkaline solutions. These plastic submersible probes are designed for continuous level measurement for wastewater or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when […]
Custom Motor Leads
Custom Motor Leads Cuvo Pumping Solutions, Inc. supplies custom motor leads for many major brands of motors including: Franklin Electric, Faradyne Motors, Grundfos, Centripro, and Hitachi. The continuous motor leads allows the motor to be installed without making an underwater splice. Because of the harsh nature of many environmental remediation sites, these continuous motor leads […]
Teflon Motor Leads
Pollution Recovery Motors
Pollution Recovery Motors Pollution Recovery motors are equipped for use in monitoring and recovery wells in which hydrocarbons and other chemicals may be present. Size: 4″ diameter Flow Range: 0 – 32 gpm HP Range: 0.5 – 2 hp Voltage: 115-230V 2-wire 1 ph/ 208, 230, and 460V 3 ph Brands: Franklin Download PDFs Pollution […]
Teflon Fitted Pump Ends
Teflon Fitted Pump Ends By removing all NBR components of the Grundfos pump end and replacing them with Teflon, you now have a pump that’s entirely constructed of Stainless Steel and Teflon; making them suitable for environmental, remediation, Leachate extraction, total fluids recovery, tank to tank transfer, and groundwater sampling applications. Teflon refit pumps are […]
Redi-Flo4” Variable Speed
Redi-Flo4® Variable Performance Pumps The Redi-Flo4® Variable Performance Pumps are submersibles constructed of virgin Teflon® and stainless steel to handle the rigors of contaminated groundwater monitoring and continuous operation in remediation applications. TheRedi-Flo4® Variable Performance Pumps are designed to operate in 4-inch and larger wells to depths of 524 feet. The theRedi-Flo4® pumps have a built-in […]
Redi-Flo4”
Redi-Flo 4″ Constructed entirely of Stainless Steel and Teflon™ and used with a Pollution Recovery Motor and continuous Teflon Motor Lead, the Redi-Flo 4” pump is the perfect pump for constant speed pumping of groundwater contaminated with petroleum hydrocarbons or other contaminants. Add a Grundfos Variable Frequency Drive and Variable Speed Motor, and now you […]
Redi-Flo3”
Redi-Flo 3″ By combining advanced electronics, permanent magnet motors, and Grundfos’ own micro-frequency converter, the Redi-Flo 3” pump can be controlled and communicated with in ways never before possible with submersible pumps. A few of the features that come out of this combination are Fluid Level Control, Soft-Start, and integrated Dry Run protection. In addition, […]
Redi-Flo2” Sampling
Redi-Flo 2″ Sampling TheRedi-Flo 2” pump is specifically designed for groundwater monitoring and fits inside a 2” Sch.40 well or larger. With pumping capabilities up to 270 ft., the wide range of flow capabilities makes this the perfect sampling pump, for traditional purging (taking several well volumes) or for low flow purging to stabilization. With […]